Enable The Syslog Server; Monitor The Wireless Access Point - NETGEAR WNDAP360 Reference

Enable the Syslog Server

The Syslog screen allows you to enable the syslog option if you have a syslog server on your
LAN. If syslog is enabled, the wireless access point sends its syslog files to the syslog server.

To enable a syslog server:
1. Select Configuration > System > Advanced > Syslog. The Syslog screen displays:
Figure 41.
Specify the settings as explained in the following table:
Table 17. Syslog Settings
Field
Enable Syslog
Syslog Server IP Address
Port Number
2. . Click Apply to save your settings.

Monitor the Wireless Access Point

The wireless access point provides a variety of status and usage information that is
discussed in the following sections:
• View System Information
• Monitor Wireless Stations
• View the Activity Log
• Traffic Statistics
ProSafe Dual Band Wireless-N Access Point WNDAP360
Description
Select the check box to enable the syslog option. By default, the syslog option
is disabled.
Enter the IP address of the syslog server to which the wireless access point
sends the syslog files.
Enter the port number that is configured on the syslog server. The default port
number is 514.
Management
69