NETGEAR WNDAP360 Reference page 94

Wireless PC card
in a notebook computer
Router
Figure 56.

To configure a point-to-multipoint wireless network:
1. Select the 802.11b/bg/ng or 802.11a/na tab.
2. Configure the security profiles on the wireless access point (AP1 on LAN Segment 1 in the
previous figure):
a. Select Configuration > Wireless Bridge. The Bridging screen displays. (The
following figure shows the screen after you have completed
Figure 57.
ProSafe Dual Band Wireless-N Access Point WNDAP360
Point-to-point
bridge mode
Advanced Configuration
Multipoint
bridge mode
Hub or switch
94
Point-to-point
bridge mode
Hub or switch
step c.)