NETGEAR WNDAP360 Reference page 20


To configure time settings:
1. Select Configuration > System > Basic > Time. The Time screen displays:
Figure 9.
2. Specify the fields as explained in the following table:
Table 3. Time System Settings
Field
Time Zone
Current Time
NTP Client
Use Custom NTP Server
3. Click Apply to save your settings.
ProSafe Dual Band Wireless-N Access Point WNDAP360
Description
Select the time zone to match your location.
This is a nonconfigurable field that displays the current date and time.
Enable the Network Time Protocol (NTP) client to synchronize the time of the
wireless access point with an NTP server. By default the Enable radio button is
selected.
Select this check box to If you want to use a custom NTP server.
Note: You need to have an Internet connection to use an NTP server that is
not on your local network.
Hostname / Enter the host name or IP address of the custom NTP server.
IP Address The default is time-b.netgear.com.
Installation and Basic Configuration
Note: If you use a host name, make sure that you have
configured a DNS server. For more information, see the next
section.
20