NETGEAR WNDAP360 Reference page 52

ProSafe Dual Band Wireless-N Access Point WNDAP360
Figure 27.
2. Specify the settings as explained in the following table:
Table 14. RADIUS Server Settings
Field
RADIUS Server Settings
Primary
Authentication Server
Secondary
Authentication Server
Primary
Accounting Server
Descriptions
IP Address Enter the IP address of the primary RADIUS server for
authentication.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the primary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
and the primary RADIUS server during authentication.
IP Address Enter the IP address of the secondary RADIUS server for
authentication. The secondary RADIUS server is used when the
primary RADIUS server is not available.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the secondary RADIUS server for authentication. The
default port number is 1812.
Secret Enter the shared key that is used between the wireless access point
and the secondary RADIUS server during authentication.
IP Address Enter the IP address of the primary RADIUS server for accounting.
Authentication Enter the UDP port number of the wireless access point that is used
Port to access the primary RADIUS server for accounting. The default
port number is 1813.
Secret Enter the shared key that is used between the wireless access point
and the primary RADIUS server during the accounting process.
Wireless Configuration and Security
52