DG834G Reference Manual
•
WAN Users
These settings determine which packets are covered by the rule, based on their source (WAN)
IP address. Select the desired option:
–
Any — all IP addresses are covered by this rule.
–
Address range — if this option is selected, you must enter the Start and Finish fields.
–
Single address — enter the required address in the Start field.
•
Log
You can select whether the traffic will be logged. The choices are:
–
Never — no log entries will be made for this service.
–
Always — any traffic for this service type will be logged.
–
Match — traffic of this type which matches the parameters and action will be logged.
–
Not match — traffic of this type which does not match the parameters and action will be
logged.
5-8
v3.0, September 2005
Protecting Your Network