Monitoring The Vpn Tunnel (Telecommuter Example; Viewing The Pc Client's Connection Monitor And Log Viewer - NETGEAR DG834GUv5 Reference Manual

DG834G Reference Manual
Establish an Internet connection from the PC.
a.
On the Windows taskbar, click the Start button, and then click Run.
b.
Type ping -t 192.168.0.1, and then click OK.
c.
Figure C-23: Running a ping test to the LAN from the PC
This will cause a continuous ping to be sent to the VPN router. After between several
seconds and two minutes, the ping response should change from timed out to reply.
Figure C-24: Ping test results
Once the connection is established, you can open the browser of the PC and enter the LAN IP
address of the VPN router. After a short wait, you should see the login screen of the VPN router
(unless another PC already has the VPN router management interface open).
Note: You can use the VPN router diagnostic utilities to test the VPN connection from the VPN
router to the client PC. Run ping tests from the Diagnostics link of the VPN router main menu.

Monitoring the VPN Tunnel (Telecommuter Example)

Viewing the PC Client's Connection Monitor and Log Viewer

To view information on the progress and status of the VPN client connection, open the 54 Mbps
Wireless ADSL Modem Router Model DG834G Log Viewer.
C-26
v3.0, September 2005
NETGEAR VPN Configuration