NETGEAR DG834GUv5 Reference Manual page 131

Table 8-1. VPN Tunnel Configuration Worksheet
Connection Name:
Pre-Shared Key:
Secure Association -- Main Mode or Manual Keys:
Perfect Forward Secrecy -- Enabled or Disabled:
NETBIOS -- Enabled or Disabled:
Encryption Protocol -- DES or 3DES:
Authentication Protocol -- MD5 or SHA-1:
Diffie-Hellman (DH) Group -- Group 1 or Group 2:
Key Life in seconds:
IKE Life Time in seconds:
VPN Endpoint
DG834G_A
DG834G_B
Note: The LAN IP address ranges of each VPN endpoint must be different. The connection will
fail if both are using the NETGEAR default address range of 192.168.0.x.
Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard.
1. Log in to the DG834G on LAN A at its default LAN address of http://192.168.0.1 with its
default user name of
main menu to display this screen. Click Next to proceed.
Virtual Private Networking
Local IPSec ID LAN IP Address
GW_A 192.168.0.1
GW_B 192.168.3.1
and password of
admin
v3.0, September 2005
DG834G Reference Manual
Subnet Mask
255.255.255.0
255.255.255.0
. Click the VPN Wizard link in the
password
GtoG
12345678
Main
Disabled
Enabled
3DES
SHA-1
Group 2
(8 hours)
28800
(1 hour)
3600
FQDN or Gateway IP
(WAN IP Address)
14.15.16.17
22.23.24.25
8-21