NETGEAR DG834GUv5 Reference Manual page 199

In the Hash Alg menu, select SHA-1.
f.
In the Encapsulation menu, select Tunnel.
g.
Leave the Authentication Protocol (AH) checkbox unchecked.
h.
Save the VPN Client settings.
7.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC will automatically
open the VPN connection when you attempt to access any IP addresses in the range of the
remote VPN router's LAN.
Check the VPN Connection.
8.
To check the VPN Connection, you can initiate a request from the remote PC to the VPN
router's network by using the Connect option in the Wireless ADSL Modem Router menu bar
(see Figure C-22). Since the remote PC has a dynamically assigned WAN IP address, it must
initiate the request.
Right-click the system tray icon to open the popup menu.
a.
Select Connect to open the My Connections list.
b.
Choose toDG834G.
c.
The 54 Mbps Wireless ADSL Modem Router Model DG834G will report the results of the
attempt to connect. Once the connection is established, you can access resources of the
network connected to the VPN router.
Figure C-22: Connecting the PC the DG834G over the VPN tunnel
To perform a ping test using our example, start from the remote PC:
NETGEAR VPN Configuration
v3.0, September 2005
DG834G Reference Manual
Right-mouse-click on
the system tray icon
to open the popup
C-25