NETGEAR DG834G Setup Manual

Netgear DG834G 54 Mbps Wireless ADSL Firewall Router Set-up Guide
_________________________________________________________________________________________________
Netgear DG834G 54 Mbps Wireless ADSL Firewall Router
Apple Macintosh Operating Systems
The set-up procedure consists of three main parts:
Connecting the hardware to your Bulldog Broadband line
•
Configuring your computer's network card
•
Configuring the Netgear DG834G via its built-in web interface
•
Package Check
Check your Netgear package. It should contain the following:
DG834G 54 Mbps Wireless ADSL Firewall Router
•
AC power adapter
•
Category 5 (Cat 5) Ethernet cable
•
Telephone cable
•
Microfilter
•
Ethernet Cabling Requirements
The DG834G Wireless ADSL router connects to your Ethernet LAN via a Category 5
(CAT5) cable such as the one provided.
Computer Hardware Requirements
To use the DG834G Wireless ADSL router on your network, each computer must have
an installed Ethernet adapter and an Ethernet cable, or an 802.11g wireless adapter.
LAN Configuration Requirements
For the initial connection to the internet and configuration of your router, you need to
connect a computer to the router which is set to automatically get its configuration
from the router.
________________________________________________________________________
i
Set-up Guide for Windows and