NETGEAR DG834GUv5 Reference Manual page 187

Figure C-10: Status Screen
Configure the DG834G as in the Gateway-to-Gateway procedures using the VPN Wizard (see
5.
"How to Set Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows.
• DG834G
LAN IP = 10.5.6.1
LAN Subnet Mask = 255.255.255.0
• FVL328
LAN IP = 172.23.9.1
LAN Subnet Mask = 255.255.255.0
In Step 1, enter toFVL328 for the Connection Name.
a.
In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.
b.
In Step 3, enter the following:
c.
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see
6.
"How to Set Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
NETGEAR VPN Configuration
v3.0, September 2005
DG834G Reference Manual
-20), being certain to
-20), being certain to
C-13