Cisco WS-C6503 Manual page 75

Chapter 3 Installing Supervisor Engines
g. Periodically check the STATUS LED.
If the STATUS LED changes from orange to green, the supervisor engine has successfully
•
completed the boot process and is now online.
If the STATUS LED remains orange or turns red, the supervisor engine has not successfully
•
completed the boot process and may have encountered an error.
Chassis with vertical slots
Position the supervisor engine in the slot. (See
a.
supervisor engine carrier with the slot guides on the top and bottom of the chassis slot.
b. Carefully slide the supervisor engine into the slot until the EMI gasket along the right edge of the
module makes contact with the module or cover plate in the slot adjacent to it and the module ejector
levers have both closed to approximately 45 degrees with respect to the module faceplate. (See
Figure
Figure 3-3
FAN
STATUS
o
OL-7397-03
3-4.)
Positioning the Module in a Vertical Slot Chassis
o
INPUT
FAN OUTPUT
OK
OK FAIL
INPUT
FAN OUTPUT
OK
OK FAIL
Insert module
between slot guides
Figure 3-3.) Make sure that you align the sides of the
Ejector lever fully
extended
EMI
gasket
EMI
gasket
Catalyst 6500 Series Supervisor Engine Guide
Installing a Supervisor Engine
3-7