Cisco WS-C6503 Manual page 30

Supervisor Engine 2
Table 2-1
Supervisor Engine 2 Product
Number
WS-X6K-S2-MSFC2
WS-X6K-S2U-MSFC2
Figure 2-1
CONSOLE port
WS-X6K-SUP2-2GE
SUPERVISOR2
Status
LEDs
Table 2-2
Table 2-2 Supervisor Engine 2 Features
Feature
Chassis compatibility
Software requirements
(minimum)
Fan tray requirements
Slot installation restrictions
Backplane
Hardware restrictions
Catalyst 6500 Series Supervisor Engine Guide
2-2
Supervisor Engine 2 Versions (continued)
Supervisor Engine 2 Front Panel Features
PCMCIA LED
CONSOLE
PORT
MODE
CONSOLE
CONSOLE PORT
PCMCIA slot
MODE switch
RESET button
lists and describes Supervisor Engine 2 features
Description
Supported on all Catalyst 6500 series chassis except the Catalyst 6509-V-E
chassis.
12.2(17d)SXB
All three versions of Supervisor Engine 2 are designed to operate with the
low-speed fan trays; they do not require that a high-speed fan tray (either a
fan tray 2 or Catalyst 6500-E series fan tray) be installed in the chassis.
Low-speed fan trays provide sufficient cooling for Supervisor Engine 2.
Slots 1 and 2 in any Catalyst 6500 series chassis
32-Gbps shared bus. 256 Gbps when a Switch Fabric Module
(WS-C6500-SFM or WS-X6500-SFM2) is installed in the chassis.
There are no additional hardware restrictions for Supervisor Engine 2.
Description
Supervisor Engine 2 (WS-X6K-S2-MSFC2) comes with a
factory-installed PFC2 daughter card (WS-F6K-PFC2) and
a factory-installed MSFC2 daughter card
(WS-F6K-MSFC2). It has two 1000BASE-X uplink ports
that require the installation of GBIC transceivers.
Supervisor Engine 2 (WS-X6K-S2U-MSFC2) comes with
a factory-installed PFC2 daughter card (WS-F6K-PFC2)
and a factory-installed MSFC2 daughter card
(WS-F6K-MSFC2). Supervisor Engine 2 has two
1000BASE-X uplink ports that require the installation of
GBIC transceivers. The MSFC2 comes equipped with
512 MB of memory.
Switch load
display
Switch Load
100%
PCMCIA EJECT
1%
Chapter 2
1000BASE-X GBIC
Uplink Ports
PORT 1 PORT 2
LINK LEDs
Supervisor Engines
OL-7397-03