Chapter 2
Supervisor Engines
Table 2-24
LED
LINK (SFP UPLINK)
MANAGEMENT port
LINK (10GE UPLINK)
OL-7397-03
Supervisor Engine 2T Front Panel Status LEDs (continued)
Color and Meaning
Each of the three SFP uplink ports has a LINK LED associated with
it. The LINK LED indicates the link status of the corresponding
port.
•
Green—The port is active (the link is connected and
operational).
•
Flashing orange—The port failed diagnostics and is disabled.
•
Orange—The port is disabled.
•
Red—The supervisor engine is resetting; an overtemperature
condition has occurred.
Note
If the supervisor engine fails to download code and
configuration information successfully during the initial
reset, the LED stays red; the supervisor engine does not
come online.
Off—The port is not active or the link is not connected.
•
The 10/100/1000 management port has an green LED associated
with it.
•
Green—The port is active (the link is connected and
operational).
Off—The port is not active or the link is not connected.
•
Each of the two 10GE uplink ports have a link LED associated with
it.
•
Green—The port is active (the link is connected and
operational).
Flashing orange—The port failed diagnostics and is disabled.
•
•
Orange—The port is disabled.
•
Red—The supervisor engine is resetting; an overtemperature
condition has occurred.
If the supervisor engine fails to download code and
Note
configuration information successfully during the initial
reset, the LED stays red; the supervisor engine does not
come online.
Off—The port is not active or the link is not connected.
Catalyst 6500 Series Supervisor Engine Guide
Supervisor Engine 2T
2-39