Cisco WS-C6503 Manual page 55

Chapter 2 Supervisor Engines
Table 2-18
Table 2-18 Supervisor Engine 720-10GE Features
Feature
Chassis compatibility
Software requirements
(minimum)
Fan tray requirements
Slot installation restrictions
Backplane
Hardware restrictions
OL-7397-03
lists and describes Supervisor Engine 720-10GE features.
Description
Supported on all Catalyst 6500 series chassis.
12.2(33)SHX
If there are no DFC-equipped modules installed, certain
Note
configurations require Release 12.2(33)SXH1 or later and impose
configuration restrictions. Refer to your software release notes for
further information.
All versions of Supervisor Engine 720-10GE require that a high-speed fan
tray (either a fan tray 2 or Catalyst 6500-E series fan tray) be installed in the
chassis.
Low-speed fan trays do not provide sufficient cooling for Supervisor
Note
Engine 720-10GE.
Supervisor Engine 720-10GE must be installed in:
Slots 1 and 2 in a 3-slot or a 4-slot chassis
•
• Slots 5 and 6 in a 6-slot or a 9-slot chassis
• Slots 7 and 8 in a 13-slot chassis
Note The primary supervisor engine can be installed in either slot.
32-Gbps shared bus
Integrated 720-Gbps Switch Fabric
There are no additional hardware restrictions for Supervisor
Engine 720-10GE.
Supervisor Engine 720-10GE
Catalyst 6500 Series Supervisor Engine Guide
2-27