Cisco WS-C6503 Manual page 33

Chapter 2 Supervisor Engines
Table 2-4
Table 2-4
LED
STATUS
SYSTEM
CONSOLE
OL-7397-03
lists Supervisor Engine 2 front panel LEDs and their meanings.
Supervisor Engine 2 Front Panel LEDs
Color and Meaning
• Green—All diagnostics pass. The supervisor engine is
operational (normal initialization sequence).
Orange—The supervisor engine is booting or running
•
diagnostics (normal initialization sequence) or an
overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental
monitoring.)
Red—The diagnostic test failed. The supervisor engine is not
•
operational because a fault occurred during the initialization
sequence or an overtemperature condition has occurred. (A
major temperature threshold has been exceeded during
environmental monitoring.)
Green—All chassis environmental monitors are reporting OK.
•
Orange—The power supply has failed or the power supply fan
•
has failed.
Red—Incompatible power supplies are installed.
•
–
–
–
–
Green—The port is active.
•
Orange—The port is disabled.
•
Off—The port is not active or the link is not connected.
•
The redundant clock has failed.
1
One VTT module has failed or the VTT module
temperature minor threshold has been exceeded
Two VTT modules fail or the VTT module temperature
major threshold has been exceeded
The temperature of the supervisor engine major threshold
has been exceeded.
Catalyst 6500 Series Supervisor Engine Guide
Supervisor Engine 2
2
.
3
.
2-5