C I SCO SYSTEM S, IN C.
Recovery Page
If logged in to a Cisco Media Processor unit, you may browse to the following URL to
reach the Recovery page:
https://<machine name or IP>/encadmin/recovery.aspx
Encoder Control
Click the Restart Encoding Service 1 button to restart the Windows service
responsible for encoding. For S3200 series units, this option will restart the service
for both channels, but Restart Encoding Service 2 will only restart the service for
channel 2.
Machine Control
Click the Reboot Machine button, then confirm, to reboot the unit.
Auto-start Encoder
By default, the encoder will restart after a reboot or a restart of the encoding
service if the encoder was running. Uncheck this box if you do not wish the
encoder to auto-start in this situation.
54