Changing Values Via The Front Panel Controls - Cisco 3005 - VPN Concentrator - Gateway Operation Manual

Main Menu
Power
Start (encoding)
Stop (encoding)
Status

Changing values via the Front Panel Controls

For the following menu items simply press the Enter key to take action.
 Start encoding
Stop encoding

 Load Profile 1 (Default Profile)
 Load Profile 2
Load Profile 3

 Save Profile 1 (Default Profile)
 Save Profile 2
Save Profile 3

For some menu items, there is a list of valid values. For example, PIP Enable can be
set On or Off. Use the up and down keys to scroll through this list. The last setting
viewed is immediately applied.
For other menu items, pressing the Enter key will place the front panel into an Edit
mode to allow the user to set values explicitly. Once Enter is pressed, a cursor will
appear to enable editing of the item. Use the left and right keys to move the cursor.
Use the up and down keys to change the value at the cursor. When finished, press
Enter to apply the new setting. If the setting is determined to be invalid, the previous
value will be restored. For IP addresses, you will be asked whether to apply changes
C I SCO S3 0 00 / S 50 0 0 S ER I E S M E D I A PRO C E S SO R S
Submenus
ASF Output
Reboot
Shutdown
43
Main Port
Main Max Clients
PIP Port
PIP Max Clients
Confirm Reboot
Confirm Shutdown