Front Panel Control Status - Cisco 3005 - VPN Concentrator - Gateway Operation Manual

C I SCO SYSTEM S, IN C.
after editing, even if the new setting matches the previous one. If you do not wish to
change the setting, select no.
NOTE:
NOTE:
NOTE:

Front Panel Control Status

The front panel status item indicates a Ready... or Running... state. If the Alarm LED
is lit, the front panel will display active alarms in rotation. For a description of alarms,
see System Status Page on page 13.
Encoding parameters may be edited using the front panel controls
while Cisco Media Processor is encoding. However, the values will
not be applied (used) until encoding has been stopped and
restarted.
To verify an updated IP address after it is applied, return to the main
menu by using the Cancel (X) button, then return to the IP address
menu item to view the current setting.
The audio output format setting is not available on the front panel
interface. If you wish to switch between WMA and AC3 audio
formats, you must use the Web interface.
44