Output Resolution - Cisco 3005 - VPN Concentrator - Gateway Operation Manual

PIP Video Page
From the main Video page, click PIP Video if you wish to encode a PIP stream. This
option is available in the S5000 Series. When you check Enable PIP on the PIP Video
page, the encoder will generate a separate video only PIP stream which is scaled from
the output image size. PIP encodes are always progressive.
NOTE:
Bit Rate
Set the PIP bit rate in units of kb/sec. For example, a value of 100 is .1 Mbits/sec..
The encoder produces CBR PIP streams. The PIP stream will not have captioning
information in it unless Open Captions are utilized.

Output Resolution

The default PIP output resolution is 96x96.
Pre-Processing Page
From the main Video page, click Pre-Processing to modify the following:
C I SCO S3 0 00 / S 50 0 0 S ER I E S M E D I A PRO C E S SO R S
You must choose Advanced Profile for encoding if you will be
enabling PIP video. See the Video Encoding Parameters Page on
page 17 for more information on encoding profiles.
19