Cisco 3005 - VPN Concentrator - Gateway Operation Manual page 18

C I SCO SYSTEM S, IN C.
A new unit will always have a factory-provided initial user name and password for each
group. The Use remote authentication checkbox must be unchecked to use these user
names. The initial encoder administrator name is:
User Name: admin
encAdm1n
Password:
The initial encoder user name is:
User Name: user
encUs3rs
Password:
The login page will indicate if a login attempt is made with an expired password. Under
the System tab, the User Account page allows passwords to be changed. Refer to the
User Account Page description on page 37 for further information. On this same tab, the
System Information page allows deletion and disabling of user accounts. Refer to the
System Page description on page 32 for further details.
See Appendix B: Managing User Accounts on page 50 for information on how to create
new users.
To log out, click the Logout link on the User Account page, then close the Web browser.
If no activity is detected for 15 minutes, you will be logged out automatically.
After logging out, it is still possible to view cached web pages by manually entering
them into the browser's address box. These pages, however, are simply cached from
the last time that page was visited; they do not reflect the current state nor can they be
used to modify the encoder state. The user must re-login in order to read or edit current
values.
10