Analog Video And Audio - Cisco 3005 - VPN Concentrator - Gateway Operation Manual

C I SCO SYSTEM S, IN C.

Analog Video and Audio

For analog sources, connect the provided breakout adapter cable for the analog video
and audio input signals to the Analog In 60-pin connector. For reference, consult the
following diagram of the breakout cable connections:
Figure 1: Cisco S3000/S5000 Series Media Processor Analog Input Breakout Adapter Cable
Use the following table to determine the proper connectors to use for analog
Component, Composite, and S-Video sources.
Color Label
green Y/CVBS
blue Pb/Y
red Pr/C
Cisco Media Processor utilizes locking BNC connectors for S-Video. If your source S-
Video is not BNC based, you will need to use a BNC S-Video adapter such as an S-
Video Male to Dual BNC Female Adapter 75 Ohm Coaxial.
Component Composite
Y CVBS
Pb
Pr
4
S-Video
Y
C