Receiving A Call - Honeywell 7900L0P-422C20E - Hand Held Products Dolphin 7900 User Manual

Sending a Call
You can:
• Tap the Send button
• Press the ENTER key on the keyboard.
• Press the appropriate key combination on the keyboard.
When the call is connected, the three information lines display the following:
Network Operator Displays the name of the service provider you are using.
Name/Number Displays the name and/or number you called. If the number is from your Phonebook, that entry
displays.
Status The status of the call.
Idle - means no calls are incoming or outgoing.
In Call - means a phone call is in progress.
Incoming Call - means that a a call is coming in.
0:00 The numbers in the lower, right corner display the minutes:seconds that have elapsed.

Receiving a Call

When the Dialler screen is open and an incoming call is detected, text is displayed on the Dialler screen. If the Dialler is not visible
at the time of the incoming call, a Navigation Bar notification appears.
When a call is coming in, the ringtone sounds and the three information lines on the Dialler screen display the following:
Network Operator Displays the name of the service provider you are using.
Name/Number Displays the name and/or number calling in. If the number is in your Phonebook, that entry displays.
Status Incoming Call.
Answering a Call
You can:
• Tap the Send button
• Press the ENTER key on the keyboard.
• Press the appropriate key combination on the keyboard.
Rejecting a Call
You can:
• Tap the End button
• Press the appropriate key combination on the keyboard.
Call Waiting
If call waiting is enabled, a second incoming call can be received while a first call is in progress. The second incoming call uses
a different ringtone but displays the same incoming call notification.
10 - 6
.
.
.
Rev F
10/16/07
Dolphin® 7900 User's Guide