Using The Status Icon - Honeywell 7900L0P-422C20E - Hand Held Products Dolphin 7900 User Manual

Using the Status Icon

You access the 801.11b Settings by tapping the Status icon once on the Today screen
Menu Option
Wireless Radio On
Wireless Radio Off
Remove Status Icon
Wireless Network Status
Configuration
Advanced Configuration
Version Information
Note: The Status Icon changes to a crossed lock
for the WEP-On AP or a station.
Dolphin® 7900 User's Guide
Description
Turns on the radio. LED is on and the Link Icon displays with signal strength.
Turns off the radio. A pop-up window will ask for your confirmation. If confirmed,
the LED will be off and the Status icon will change color from green to red on the
top without signal strength displayed. The WLAN card/module will stop functioning.
Removes the Status Icon from the bottom tray. A pop-up
window asks you to confirm.
If confirmed, the Status icon does not display in the task tray,
and you will need to go to Start > Settings > Connections
tab > 802.11b Settings in the future.
Opens the Status tab.
Opens the Config tab.
Opens the Advanced tab.
Opens the About tab.
as a warning that you may have entered a wrong key (WEP Key mismatch)
Rev F
10/16/07
. The following menu pops up:
8 - 9