Connections Tab
The Connections tab enables you to manage your network connections.
Icon
Tapping this icon...
Beam
Enables you to verify and adjust the infrared settings of the IrDA port; see
Connections
Opens the connections manager; see
Network Cards
Enables you to access the Wireless and Network Adapters tabs; see
Radio Manager
Enables you to enable and disable radios installed on the terminal; see
Other Icons on the Connections Tab
Other icons appear on this window if your terminal is configured with specific network software, protocols, and/or radios.
802.11b Settings
This icon appears only if an 802.11b radio and driver is installed on the terminal.
Tapping this icon enables you to configure your 802.11b radio; see
Communications with 802.11b
IrDA
This icon appears only if a Bluetooth radio and driver is installed on the terminal.
Tapping this icon enables you to disable or enable the IrDA port; see
Enabled
uPhone GPRS
This icon appears only if a GSM/GPRS radio and driver are installed on the terminal.
Tapping this icon opens the GPRS settings; see
Server-Assigned IP Addresses
All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
Zero-Config Wi-Fi
The zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7900 terminals.
6 - 14
on page
on page
7-5.
Rev F
10/16/07
Connections Manager
on page
8-1.
GPRS Settings
on page
Using Infrared
on page
6-16.
Network Cards
on page
6-17.
Radio Manager
on page
Wireless LAN (WLAN)
Verify That the IrDA Port is
10-20.
Dolphin® 7900 User's Guide
7-5.
7-8.