Logging - Honeywell 7900L0P-422C20E - Hand Held Products Dolphin 7900 User Manual

WPA Settings Tab
Field Description
WPA Mode This drop-down list contains the following options:
• Disabled - Do not enable WPA mode. This is the default selection.
• WPA 802.1x - Enable WPA and obtain key information through the 802.1x protocol.
• WPA PSK - Enable WPA with Pre-Shared Key (PSK) information entered in the field
PSK pass-phrase This field activates if you select WPA PSK in the WPA Mode drop-down list. Asterisks
appear as you type for increased security.

Logging

The event log is an ASCII text file named "LOG8021X.TXT" located in the directory defined by the WINDIR environment variable
(usually the Windows directory). The information the log records is determined by the log settings on the System tab.
The format of the entries is
The Refresh button at the bottom of the screen is used to update the log file while you are reading it. If the file gets too large, old
entries are automatically deleted.
If you wish to start with a blank file, exit from the Client (so the icon no longer appears at the lower right of the screen) and delete
the log file (log8021x) in File Explorer.
When you restart the Client, a new log file is created.
8 - 24
below. This mode is used if the 802.1x protocol is not being used for authentication.
Time Stamp Message Text
Rev F
10/16/07
Dolphin® 7900 User's Guide