Rear Panel - Honeywell 7900L0P-422C20E - Hand Held Products Dolphin 7900 User Manual

Battery Capacity Indicator LEDs
These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For
more information, see
Analyze Button
Press this button to start a battery analyze cycle; see
Status LEDs
A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the
batteries in its slot.

Rear Panel

Power Switch
Toggle the power switch to turn the QuadCharger on and off.
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input
voltages between 90-265 volts.
12 - 2
Battery Capacity Indicator LEDs
Status LED color This color indicates that the battery in the slot...
Green Has completed its charge cycle and is ready for use.
Orange Is being charged at a maximum charge rate.
Red Encountered an error during the most recent charge cycle.
Status LED
Rev F
10/16/07
on page 12-2.
Using the Battery Analyzer
Power Switch Power Supply Connector
on page 12-4.
Dolphin® 7900 User's Guide