Honeywell HTR1 Installation And Operating Manual page 40

Mobile video system
Hide thumbs Also See for HTR1:
Table of Contents

Advertisement

Specifications
Specification (cont'd)
Connector
No video signal
VCR audio signal
Audio recording
Output level
Signal to noise ratio
Frequency response
Audio distortion
Connector
Text overlay
Title
Time and date
Vehicle GPS position
Vehicle speed
Vehicle direction
Recorded signals
Number of trigger inputs
Text
Input level
Input protection
Speed indicator
Range
Note
Specifications are subject to change without notice.
Rev B
Description
RCA (back panel input)
RCA (front panel output)
Auto detection, message displayed on the screen
Two independent channels, recording continuously
-7 dBm, 10K Ω, RCA Pin jack
60 dB
20 Hz to 20 kHz ± 3 dB
Less than 0.5%
RCA
Up to 20 characters, user selectable
Real time clock with battery backup
and automatic Daylight Saving Time
AM/PM format, three letters for month
Latitude and longitude (requires optional HTRGPS module)
MPH or KPH (requires optional HTRGPS module)
N/NE/E/SE/S/SW/W/NW (requires optional HTRGPS module)
Five
Three characters per signal, user
selectable
Active high (12 VDC) or active low
(0 VDC), user selectable
Reverse polarity protection, 600W
transient protection
(optional - GPS module must be installed)
0 to 255 MPH or KPH
40
Document 800-00759
11/07

Advertisement

Table of Contents
loading

Table of Contents