Table of Contents
Advertisement
System Operation
Table 4-1
VCR Front Panel Controls
Controls (cont'd)
EJECT
REW
PLAY
FF
(Fast Forward)
STOP
REC
POWER Indicator
EP Indicator
REC Indicator
Operating the HTR1
Inserting a Tape into the VCR
Rev B
Function
Press EJECT to eject the tape.
Press REW once to rewind the tape or to search through the images from the most
current image backwards.
Press the PLAY button to resume normal playback. The VCR slows down before
reaching the beginning of the tape. When it reaches the beginning, it automatically
starts recording in a loop, if enabled (see
Press PLAY once to stop the current VCR operation and play back the tape.
Press FF to advance the tape or to search forward.
Press the PLAY button to resume normal playback. The VCR slows down before
reaching the end of the tape. When it reaches the end, it automatically starts
rewinding the tape, if enabled (see
Press STOP once to stop the current VCR operation.
Press REC once to start recording. Press the STOP button to stop recording.
Indicates when the HTR1 is connected to a power source.
Indicates when the HTR1 is in the EP recording mode.
Indicates when the HTR1 is recording.
Subject to record delay and timer settings, the unit starts a recording every time the HTR1
receives an ignition trigger. When the ignition trigger is removed, the recorder stops
recording, subject to record delay and timer settings. You can view recorded video by
pressing PLAY on the remote control to enter Play mode.
Before you use Play mode the first time to view, familiarize yourself with the remote control
functions (see
Table
3-1,
page 24
The following subsections describe basic system operations.
To insert a tape in the VCR:
1.
Unlock the access panel on the front of the VCR enclosure.
2.
If the vehicle ignition is off, press POWER on the front panel of the VCR. The VCR
must be powered to accept the tape.
Record
Mode, page 30).
Record
Mode, page 30).
for an overview).
34
Document 800-00759
11/07
Advertisement
Table of Contents
