Honeywell HTR1 Installation And Operating Manual page 29

Table 3-5 Main Menu Fields
Name Description and Use
Automatic DST This field allows you to enable or disable the automatic
On/Off Daylight Saving Time adjustment function. The standard
on/off symbols are used. Automatic DST is not enabled by
default. You must turn it on.
Trigger Labels These are 3-character labels for the five input triggers.
Use the Right and Left buttons on the remote to move the
cursor between characters. Use the Up and Down buttons
to cycle through the letters and numbers.
Labels can contain capital letters A to V, and numbers from
0 to 9, plus the number symbol (#), the hyphen (-), the
slash (/), and space.
For example, standard trigger labels are usually the
following:
BRK = Brake
STP = Stop
TRN = Turn signal
FSH = Stop flashers
ARM = Stop arm
Trigger Label Enable
On/Off trigger. When a trigger label is Off, then it doesn't appear
on the recorded video.
Even if the label is switched Off, the cameras still switches
with the trigger.
Trigger Level Indicate whether the associated trigger is considered active
for a High
remote buttons to toggle between the two settings.
Trigger Switch These settings determine whether the associated triggers
will result in a camera switch from Camera 1 to Camera 2.
Use the Up and Down buttons on the remote to navigate
between the two settings of On
If you enable this field, the unit switches cameras when the
associated trigger is active.
Enable only one trigger switch to switch cameras.
Record START Set this field to determine the time in minutes (00 to 60) that
Delay the unit will delay before initiating recording after the vehicle
ignition is switched on.
00 indicates the VCR starts recording as soon as the bus
starts. 60 indicates that the VCR starts recording 60
minutes after the bus starts.
Record STOP Set this field to determine the time in minutes (00 to 60) that
Delay the unit continues to record after the vehicle ignition is
switched off.
Rev B
or disable the display of the associated
or Low signal. Use the Up and Down
and Off
29
HTR1 Installation and Operating Guide
Text Tip
Automatic DST ON/OFF
Trigger n Label
Trigger n ON/OFF
Trigger n LEVEL
Trigger n CAM SWITCH?
.
Record START Delay (min)
Record STOP Delay (min)
Document 800-00759
11/07