Figure 2-2 Wiring Connections - Honeywell HTR1 Installation And Operating Manual

DB25 connector
VCR rear panel
Camera 1
Audio in
Video in
Power
Rev B
7. An optional external microphone can also be connected to the Aux In Audio. To order,
contact your Honeywell representative. See the back cover of this guide for contact
information.
8. Insert the 3A fuse into the fuse holder connected to the positive battery terminal of the
vehicle.
Figure 2-2 shows the wiring on the wiring harness that connects to the electrical system.
Figure 2-2 Wiring Connections
20 ft. (6.1 m) cables
Signals harness
N/A Cam 2
Aux Audio Main Audio Cam 1 Cam 1
Power
HTR1 Installation and Operating Guide
Power harness
Red wire
Black wire
White wire
Brown wire
Black wire
Green wire
Red wire
Blue wire
Interface
Cam 2
Power
19
Battery (POS - 3A fuse)
Battery (NEG)
Ignition
Input signal 1 BRK
Input signal 2 STP
Input signal 3 TRN
Input signal 5 FSH
Input signal 5 ARM
Camera 2 (Stop Arm)
Video in
Power
Optional external
microphone (call
to order)
Document 800-00759
11/07