Table of Contents
Advertisement
Installation
Equipment Required
New Installation
Choosing the Location
Rev B
Check that the items received match those listed on the order form and packing slip. If any
parts are missing or damaged, please contact the dealer you purchased the HTR1 system
from, or call Honeywell Customer Service (see
The following tools may help you to complete the installation:
•
Drill
•
Phillips screwdriver
•
Wire cutters
This section shows you how to install an HTR1 in a school bus that does not have an
existing mobile video system. To upgrade an existing mobile video system (for example, a
Silent Witness SWS310 or SWS210), see
Choose a location for installation that:
•
Provides convenient access for installing or removing the VCR or tapes
•
Has a rigid surface, such as the dashboard, headliner, or under a seat
•
Conforms to local regulatory guidelines
Avoid any location for installation:
•
That is subject to high vibration
•
That is subject to high sunlight levels
•
Where passengers can interfere with it
•
Next to a heater duct
•
On the floor if the bus is washed out with a hose
Warranty and
Upgrade
Installation, page 21.
16
Service, page 12).
Document 800-00759
11/07
Advertisement
Table of Contents
