Mounting Options; Figure 2-1 Mounting Options - Honeywell HTR1 Installation And Operating Manual

Mounting Options

Inverted Installation
Rev B
Table 2-1 lists recommended location options.
Table 2-1 Installation Locations
Location
Bottom of glove box -
horizontal mount
Inside glove box - horizontal
mount
Bottom of passenger seat
behind bus driver - horizontal
mount
Underneath bulkhead -
horizontal mount
Console - horizontal mount
Beside driver seat - horizontal
mount
Caution Honeywell recommends that you do not install the HTR1 on the
transmission access hatch. This location has the highest level of
vibration (and may be subject to water damage).
The VCR enclosure can be mounted:
• Horizontally, either upright or inverted, as shown in
Figure 2-1 Mounting Options
Horizontal options
HTR1 Installation and Operating Guide
Convenient Easy to
operation install
Figure
Upright Installation
17
Low Good air
vibration flow
2-1.
Document 800-00759
11/07