Table of Contents
Advertisement
Examples
Rev B
The following table indicates the March and November changeover dates from the year
2007 to 2017. The HTR1 DVR has settings for up to 2035.
Table 3-6
Daylight Saving Time Changeover Dates
Year
March date when clocks are
reset one hour forward
2007
11
2008
9
2009
8
2010
14
2011
13
2012
11
2013
10
2014
9
2015
8
2016
13
2017
12
Notes
If no timers are enabled—that is,
only.
When any timer is enabled, the VCR turns on with the ignition signal, but does not start
recording until the current time is within the Timer Start and Timer Stop times. The only
exception to this rule is if the stop time is earlier than the start time, the VCR records through
midnight, provided the vehicle is running.
11:00P 02:30A
means that the VCR starts recording at 11:00 PM and stops
recording at 2:30 AM, provided the vehicle is running.
To record for 23 hours and 59 minutes, set the start time to 12:05A
to 12:04A.
When the timers are on, the VCR does not record unless the trigger is active (for example,
the bus ignition is on) or the delay-off time has not ended.
When two or more timers do not overlap in time, the VCR starts and stops according to the
timer schedule.
When two or more timers overlap chronologically, the earliest start time and the latest stop
times are considered.
HTR1 Installation and Operating Guide
November date when clocks are
reset one hour back
4
2
1
7
6
4
3
2
1
6
5
displays—the VCR responds to the ignition trigger
31
and the stop time
Document 800-00759
11/07
Advertisement
Table of Contents
