Registering The Phone With Cisco Unified Communications Manager; Checking Network Connectivity; Verifying Tftp Server Settings - Cisco CP-3911 - Unified SIP Phone 3911 VoIP Administration Manual

Resolving Startup Problems

Registering the Phone with Cisco Unified Communications Manager

Checking Network Connectivity

Verifying TFTP Server Settings

Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
7-4
A Cisco Unified IP Phone can register with a Cisco Unified Communications
Manager server only if the phone has been added to the server or if
auto-registration is enabled. Review the information and procedures in the
"Adding Phones to the Cisco Unified Communications Manager Database"
section on page 2-9 to ensure that the phone has been added to the Cisco Unified
Communications Manager database.
To verify that the phone is in the Cisco Unified Communications Manager
database, choose Device > Phone > Find from Cisco Unified Communications
Manager Administration to search for the phone based on its MAC Address. For
information about determining a MAC address, see the
Address for a Cisco Unified IP Phone" section on page
If the phone is already in the Cisco Unified Communications Manager database,
its configuration file may be damaged. See the
File" section on page 7-6
If the network is down between the phone and the TFTP server or Cisco Unified
Communications Manager, the phone cannot start up properly. Ensure that the
network is currently running.
The Cisco Unified IP Phone uses the TFTP Server 1 setting to identify the primary
TFTP server used by the phone. You can determine this setting by pressing the OK
button and choosing Settings > Network Configuration > TFTP Server.
If you have assigned a static IP address to the phone, you must manually enter a
setting for the TFTP Server 1 option. You can also enable the phone to use a
dynamic TFTP server.
For more information on configuring network settings, see the
Network Settings" section on page
Chapter 7
"Creating a New Configuration
for assistance.
4-3.
Troubleshooting and Maintenance
"Determining the MAC
2-12.
"Configuring
OL-14029-01