Network Requirements; Cisco Unified Communications Manager Configuration - Cisco CP-3911 - Unified SIP Phone 3911 VoIP Administration Manual

Before You Begin

Network Requirements

Cisco Unified Communications Manager Configuration

Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
3-2
For the Cisco Unified SIP Phone 3911 to successfully operate as a Cisco Unified
IP Phone endpoint in your network, your network must meet the following
requirements:
Working Voice over IP (VoIP) Network:
•
VoIP configured on your Cisco routers and gateways
–
Cisco Unified Communications Manager installed in your network and
–
configured to handle call processing
IP network that supports DHCP or manual assignment of IP address, gateway,
•
and subnet mask
The Cisco Unified IP Phone displays the date and time from Cisco Unified
Communications Manager. If the Cisco Unified Communications Manager server
is located in a different time zone than the phones, the phones will not display the
correct local time.
The Cisco Unified IP Phone requires Cisco Unified Communications Manager to
handle call processing. Refer to Cisco Unified Communications Manager
Administration Guide or context-sensitive help in the Cisco Unified
Communications Manager application to ensure that Cisco Unified
Communications Manager is set up properly to manage the phone and to properly
route and process calls.
If you plan to use auto-registration, verify that it is enabled and properly
configured in Cisco Unified Communications Manager before connecting any
Cisco Unified IP Phone to the network. See the
Unified Communications Manager Database" section on page 2-9
You must use Cisco Unified Communications Manager to configure and assign
telephony features to the Cisco Unified IP Phones. See the
Available for the Cisco Unified IP Phone" section on page 5-1
In Cisco Unified Communications Manager, you can add users to the database and
associate them with specific phones. See the
Communications Manager" section on page 5-5
Chapter 3 Setting Up the Cisco Unified IP Phone
"Adding Phones to the Cisco
"Telephony Features
"Adding Users to Cisco Unified
for details.
for details.
for details.
OL-14029-01