Objectives; Organization - Cisco CP-3911 - Unified SIP Phone 3911 VoIP Administration Manual

Objectives

Objectives

Organization

Chapter
Chapter 1, "An Overview of the
Cisco Unified IP Phone"
Chapter 2, "Preparing to Install the Cisco
Unified IP Phone on Your Network"
Chapter 3, "Setting Up the Cisco
Unified IP Phone"
Chapter 4, "Configuring Settings on the Cisco
Unified IP Phone"
Chapter 5, "Configuring Features and Users"
Chapter 6, "Viewing Status, Statistics, and
Firmware Information on the Cisco
Unified IP Phone"
Chapter 7, "Troubleshooting and Maintenance"
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
x
This guide provides the required steps to get the Cisco Unified IP Phone up and
running on a Voice-over-IP (VoIP) network.
This manual is organized as follows:
Description
Provides a conceptual overview and description of
the Cisco Unified IP Phone.
Describes how the IP Phone interacts with other
key IP telephony components, and provides an
overview of the tasks required prior to installation.
Describes how to properly and safely install and
configure the Cisco Unified IP Phone on your
network.
Describes how to configure network settings,
verify status, and make global changes to the
Cisco Unified IP Phone.
Provides an overview of procedures for
configuring telephony features, configuring
directories, configuring phone button and softkey
templates, setting up services, and adding users to
Cisco Unified Communications Manager.
Provides an overview of procedures for
configuring telephony features and adding users to
Cisco Unified Communications Manager.
Provides tips for troubleshooting the
Cisco Unified IP Phones and the Expansion
Module.
Preface
OL-14029-01