Sip Dial Rules; Configuring A Sip Phone Dial Plan; Enabling The Cisco Unified Sip Phone 3911 To Use Dtmf - Cisco CP-3911 - Unified SIP Phone 3911 VoIP Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-2 Checklist for Configuring the Cisco Unified SIP Phone 3911 in
Cisco Unified Communications Manager (continued)
Task
5. Associate a user with a phone
(optional).
6. Configure a SIP Phone Dial Plan for
the Cisco Unified SIP Phone
3911(optional).
7. Configure the system to support the
use of DTMF on the Cisco Unified SIP
Phone 3911(optional).
Cisco Unified SIP Phone 3911 Administration Guide for Cisco Unified Communications Manager
OL-14029-01
Overview of Configuring and Installing Cisco Unified IP Phones
Purpose
Provides users with control
over their phone such as for-
warding calls or adding
speed-dial numbers.
Some phones, such
Note
as those in confer-
ence rooms, do not
have an associated
user.
To ensure successful call
completion on systems that
require digits to be sent one
at a time.
Provide users access to
voice-messaging systems or
to navigate interactive voice
response (IVR) applications
by using the keypad to
generate DTMFs.
For More Information
Refer to Cisco Unified Com-
munications Manager Admin-
istration Guide,
"End User Configuration"
chapter, "Associating Devices
to a User" section.
Refer to Cisco Unified Com-
munications Manager Admin-
istration Guide,
"SIP Dial Rules Configura-
tion" chapter.
See the "Configuring a SIP
Phone Dial Plan" section on
page 4-9.
Refer to Cisco Unified Com-
munications Manager Admin-
istration Guide,
"Media Termination Point
Configurations" chapter and
"Cisco Unified IP Phone"
chapter.
See the "Enabling the Cisco
Unified SIP Phone 3911 to Use
DTMF" section on page 4-9.
1-13