Network Setup - Cisco UC320W Pre-Installation Site Information

Service Provider Information
SP Name
SP Contact
Information
Service Order Number
Service Order Type
Service Activation
Date
Account Number
DHCP Server Information
Will the site use the UC320W as the DHCP server (default setting), or another device?
Circle one. Using UC320W as the DHCP server
IMPORTANT: If another device acts as the DHCP server, special steps are needed to disable the DHCP server in the UC320W
before adding it to the network. These steps are required to prevent address conflicts and to avoid network problems. (For
documentation, see www.cisco.com/go/uc300.)

Network Setup

System Access
New Administrator Username for UC320W:
New Password for UC320W:
cisco admin
nor is allowed.)
Enable remote management (WAN access)? Circle one.
Enable wireless management from PC connected to wireless network? Circle one.
Cloud (WAN Connection)
Estimated Uplink Bandwidth: Circle one.
In the table on the following pages, find the correct WAN Type (IP addressing type) in the first column. Provide the required
information for the selected type. Provide any optional information that is available from the customer's Internet Service Provider.
Internet Service Provider
128k
PSTN Service Provider
(Analog Trunks)
Using another device as the DHCP server
(Include lowercase and uppercase letters and numbers. Neither

Yes No
256k 384k 512k
Pre-Installation Workbook
SIP/BRI Service Provider
(Voice over IP Service)
cisco admin
(Neither nor

Yes No
768k 1M 2M
is allowed.)
4M
3