Allocating Numbers To Speed Dial - Cisco DX80 User Manual

35 Contacts

Allocating Numbers to Speed Dial

Tap Calls to invoke the display shown here
and then tap More ( ... ), followed by Add a
speed dial in the drop-down menu.
Tap More ( ... ) again.
Once located, specify the Speed dial code to
be associated with this person. In this example
1 is used as speed dial code. Tap OK to leave
menu putting changes into effect.
EFT Draft 1—Cisco Confidential—Do Not Distribute
You will now be prompted to log into the
system using you username and password.
Tap Add a speed dial in the drop-down
menu.
The speed dial allocation and the
corresponding code is indicated as shown.
Authentication will then take place.
Locate whom to allocate to a speed dial.
About Speed Dial
Speed Dial is a convenient shortcut
to contacts that you use often. You
allocate a speed dial code (typically
a number) to the entry and use that
to call that person.
How to utilize already allocated
speed dial settings is shown in the
chapter Calling Tasks.
D1510401 User Guide
Cisco Collaborate Desk DX80
Produced: April 2014, All contents © 2014
Cisco Systems, Inc. All rights reserved.