Call Progress Tones - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Regional Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
• Control Timer Values (sec), page 230
• Vertical Service Activation Codes, page 230
• Vertical Service Activation Codes, page 230
• Outbound Call Codec Selection Codes, page 236
• Time (Cisco SPA 525G Only), page 239
• Language (Cisco SPA 525G only), page 239
• Miscellaneous, page 239

Call Progress Tones

Parameter
Dial Tone
Bluetooth Dial Tone (Cisco
SPA 525G only)
Outside Dial Tone
Prompt Tone
Busy Tone
Description
Prompts the user to enter a phone number.
Defaults to 350@-19,440@-19;10(*/0/1+2).
Tone that indicates a bluetooth headset is on and the
user can make a call.
Defaults to 350@-19,440@-19;1(0/*/0);10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter
an external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
Defaults to 420@-16;10(*/0/1).
Prompts the user to enter a call forwarding phone
number.
Defaults to 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an outbound
call.
Defaults to 480@-19,620@-19;10(.5/.5/1+2).
B
226