Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 40

Configuring Lines and Extensions
Configuring Lines
STEP 4
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Under Line Key LED Pattern, use the following letters to customize the fields
shown in the following table:
• "p" indicates "pattern": the blinking pattern of the LED
• "c" indicates "color": the color of the LED
• "r" indicates "red": a red-colored LED
• "g" stands for "green": a green-colored LED
Parameters
Idle LED
Remote Undefined
LED
Local Seized LED
Remote Seized LED
(applicable only to
shared call
appearance)
Local Progressing
LED
Remote Progressing
LED
(applicable only to
shared call
appearance)
Local Ringing LED
Description
Appears when the line is idle.
Defaults to blank (c=r).
LED pattern during the Remote Undefined state, where the
shared call state is undefined (the station is still waiting for the
state information from the application server). Not applicable if
the call appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=d.
Appears when this station seizes the call appearance to
prepare for a new outbound call.
Defaults to blank (c=r).
Appears when the shared call appearance is seized by
another station.
Defaults to blank (c=r; p=d).
Appears when this station attempts an outgoing call on this call
appearance (the called number is ringing).
Defaults to blank (c=r).
Appears when another station attempts an outbound call on
this shared call appearance.
Defaults to blank (c=r; p=d).
Appears when the call appearance is ringing.
Defaults to blank (c=r;p=f).
2
29