Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 66

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Features
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
NOTE
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
To configure programmable softkeys:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
In the Programmable Softkeys section, under Programmable Softkey Enable,
choose yes.
To configure a speed dial script, enter the following in the PSK field:
extensionname
fnc=sd;ext=
fnc
where is the function of the key (speed dial), ext (
extension being dialed,
outbound call is sent, and
name
The field displays on the softkey on the phone display screen. Cisco
recommends a maximum of 8 characters for a Cisco SPA 50X phone and 10
characters for a Cisco SPA 525G phone. If more characters are used, the label can
be truncated on the phone display.
To configure an XML script, enter the following in the PSK field:
scriptURL.xml
fnc=xml;url=http://
fnc
where is the function of the key (an XML script),
where the script is located, and
The scriptname field displays on the softkey on the phone display screen. Cisco
recommends a maximum of 8 characters for a Cisco SPA 50X phone and 10
characters for a Cisco SPA 525G phone. If more characters are used, the label can
be truncated on the phone display.
You can use macro variables in XML URLs. The following macro variables are
supported:
• User ID—UID1, UID2
• Display name—DISPLAYNAME1, DISPLAYNAME2
outboundextnum
@$PROXY;vid=
vid
is the extension on the calling phone from which the
name
is the name of the speed dial being configured.
scriptname
;nme=
scriptname is the name of the script.
name
;nme=
extensionname
) is the
scriptURL.xml
is the URL
3
55