Configuring Extension Mobility With A Broadsoft Server - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Extension Mobility with a BroadSoft Server

STEP 4
STEP 5
Configuring Extension Mobility with a BroadSoft Server
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Under Call Feature Settings, in the MOH Server field, enter the user ID or the URL
of the MOH streaming audio server. If you enter a user ID (no server), the current or
outbound proxy is contacted. Defaults to blank (no MOH). If used with a Cisco SPA
9000 Voice System, defaults to
9000 Voice System Administration Guide
Click Submit All Changes.
This feature is not available on the WIP310.
If your phones use a BroadSoft server, users can dynamically log in on their
phones using extension mobility (EM).
EM lets people who work different shifts or who work at different desks during the
week share an extension. EM dynamically configures a phone according to the
current user. A Login prompt appears on the phone display when EM is enabled.
The user must enter their User ID and Password.
For example, when User A logs in to the phone, all of her personal phone settings
are available. Later in the day, User B can log in to the same phone and use his
personal settings. After logging on, users have access to personal directory
numbers, services, speed dials, and other properties on their phone.
When a user logs out, the phone reverts to a basic profile with limited features
enabled.
To configure extension mobility:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under Extension Mobility, in the EM Enable field, choose yes.
In the EM User Domain field, enter the BroadSoft domain for the phone.
imusic
. For more information, see the
.
3
Cisco SPA
76