Cisco SPA 500 Series and Wireless IP Phone Field Reference
Ext Tab
Ext Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Shared Held Key List
PSK1 through PSK6
The Ext tabs vary by phone and depend on the number of extensions the phone
model supports.
This section describes the fields for the following Ext tab headings:
•
General, page 245
•
Share Line Appearance, page 264
•
NAT Settings, page 265
•
Network Settings, page 265
•
SIP Settings, page 266
•
Call Feature Settings, page 269
•
Proxy and Registration, page 271
Description
Softkeys that display when a call is on hold on a
shared line. See
Customizing Phone Softkeys,
page 50
for more information.
To configure a speed dial script, enter the following
in the PSK field:
extensionname
fnc=sd;ext=
extnum
name
;nme=
where fnc is the function of the key (speed dial), ext
(
extensionname
) is the extension being dialed,
the extension on the calling phone from which the
outbound call is sent, and
speed dial being configured.
To configure an XML script, enter the following in the
PSK field:
scriptURL.xml
fnc=xml;url=http://
where fnc is the function of the key (an XML script),
scriptURL.xml
is the URL where the script is located,
scriptname
and
is the name of the script.
B
outbound
@$PROXY;vid=
vid
name
is the name of the
scriptname
;nme=
is
263