Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual page 209

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Info Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
Current Gateway
Primary DNS
Secondary DNS
NTP Enable (Cisco SPA 525G
only)
Primary NTP Server (Cisco
SPA 525G only)
Secondary NTP Server
(Cisco SPA 525G only)
TFTP Server (Cisco SPA
525G only)
Bluetooth Enabled (Cisco SPA
525G only)
Bluetooth Firmware Version
(Cisco SPA 525G only)
Bluetooth Connected (Cisco
SPA 525G only)
Bluetooth MAC (Cisco SPA
525G only)
Connected Device ID (Cisco
SPA 525G only)
Wireless Enabled (Cisco SPA
525G only)
Wireless Connected (Cisco
SPA 525G only)
Wireless MAC (Cisco SPA
525G only)
SSID (Cisco SPA 525G only)
Description
Displays the default router assigned to the IP phone.
Displays the primary DNS server assigned to the IP
phone.
Displays the secondary DNS server assigned to the IP
phone.
Shows if Network Time Protocol is enabled.
IP Address of the primary NTP server.
IP Address of the secondary NTP server.
Address of the TFTP server for provisioning.
Shows if Bluetooth is enabled.
Displays the Bluetooth firmware version.
Shows if a Bluetooth device is connected to the phone.
Shows the hardware address of the Bluetooth device.
Shows the name of the connected Bluetooth device.
Shows if Wireless-G is enabled on the phone.
Shows if the phone is connected to the wireless
network.
Shows the hardware address of the Wireless-G
controller.
Shows the SSID, or name of the wireless router to
which the phone is connected.
B
198