Getting Started
Using the Web Administration User Interface
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
To perform these tasks...
Configure parameters to adjust SIP stack and
protocols. To enable:
•
CTI
•
SIP-B
•
STUN
Configure provisioning parameters. To:
•
Enable remote provisioning
•
Enable firmware upgrades
•
Set general purpose parameters
Configure parameters that depend on country or
region, including:
•
Call progress tones
•
Ring patterns
•
Star codes/vertical service activation codes
•
Vertical service announcement codes
•
Local date/time and language
Configure General phone station info, which
applies to all extensions configured for the phone,
including:
•
Station name, voice mail number, text logos
and background pictures
•
Extension numbers for line keys
•
Shared call (line) appearance
•
Enabling call conferencing, call forward, call
transfer, and so on.
•
Select ring tones, audio input, and extension
mobility settings
On the web UI, click the ...
SIP tab
See
Chapter 4, "Configuring
SIP, SPCP, and NAT."
Provisioning tab
Provisioning
The
tab is viewable
by Admin logins only.
See
Chapter 6, "Provisioning
Basics."
For additional
information about provisioning,
Cisco Small Business IP
see the
Telephony Devices Provisioning
Guide
(for Cisco service
providers).
Regional tab
See
Chapter 7, "Configuring
Regional Parameters and
Supplementary Services."
Phone tab
See
Chapter 3, "Customizing
Cisco SPA and Wireless IP
Phones."
1
15