Tone; Flash; Dual - Samsung SF-4500 User Manual

Tone

You may often need to use Touch-Tone dial signals to perform special
operations by phone. Bank-by-phone and voice mail are two examples of
systems that require these signals. If you have pulse service, you can still
send Touch-Tone signals by following these steps.
1. Dial the number using pulse dialing.
2. When the remote phone answers, press
press will be sent as Touch tones for the remainder of the call.
3. Dial the remaining numbers required by the service. The machine
returns to the pulse mode after you finish the call.

Flash

When a call comes in and you want to connect the caller to another party,
you can transfer the call by pressing Flash and dialing the number of that
other party. This may not be compatible with some phone systems. Contact
your phone supplier.
1. When you are on the phone and want the caller to be connected to
another party, press Flash.
2. Enter the number of the other party.
If you do not have a special service that uses the switch-hook signal, donÕt
press Flash during a call. If you do, you could disconnect the line.

Dual

Your machine can perform more than one of its many functions at the same
time. For example, you can simultaneously:
¥ Print a PC document while sending a fax.
¥ Receive a fax into memory while making a copy.
¥ Print an incoming fax document while scanning a document to the PC.
¥ Receive a fax into memory while printing a PC document.
¥ Store a fax document for later transmission while printing an incoming
fax.
When the machine performs dual tasks, Press Dual to toggle the display
between the current operation and new operation.
. Any numbers you now
Other Features
2.51