Receiving Automatically in TEL/FAX mode
1. Make sure that TEL/FAX is selected in the SmartFAX window.
2. When you get a call, the machine answers the call on the second ring and
receives a fax signal automatically. You can change the number of rings.
See page 4.14.
3. If the machine does not sense a fax signal, your machine will give
another ringing tone to tell you it is a phone call.
4. Lift the handset to answer the call. If you do not pick up the handset
within a specified time, the machine will switch to automatic fax
reception mode.
Receiving Automatically in ANS/FAX mode
To Use this mode, you must attach an answering machine to the EXT jack
on your SF4500 Serise machine.
1. Make sure that ANS/FAX is selected in the SmartFAX window.
2. When you get a call, the answering machine answers its. If the caller
leaves a message, the answering machine stores stores the message
normally.
If your machine hears a fax tone on the line, the fax receive mode is
activated.
4.9