Scanning Problems - Samsung SF-4500 User Manual

Scanning Problems

Symptom
You cannot scan a document
into memory.
The unit scans very slowly.
There is no document or the
document is loaded
improperly.
Scanner is busy receiving or
printing data.
Memory is not enough to
save the scan image.
3.14
Troubleshooting
¥ Make sure that you load the document to be scanned into
the document tray.
¥ There may not be enough available memory to store the
document you want to scan.
¥ Print out any documents stored in memory.
¥ If there are any fax documents stored in memory waiting to
be sent, wait until they are dispaged of. See page 2.22.
¥ Graphics scan more slowly than text.
¥ Communication speed becomes slow in scan mode because
a lot of memory is required to analyze and reproduce the
scan image. Set your computer to ECP mode through the
BIOS setting it will help to increase the speed. For details on
how to set BIOS, refer to the documentation of your
computer.
Insert the document properly when ÔTRY AGAINÕ message
appears on the screen.
Insert the document properly and push it down until the
machine grips the document.
Your scanner may be currently used for copying or faxing.
When the current job is completed, try again.
There is not enough memory to save the scan image. Exit all
applications currently open, if not required, in order to save
memory.
Cause and Solution