Preferences - Samsung SF-4500 User Manual

Preferences

This option allows you to setup some pre-scanning conditions.
Setting the Preferences
Select Preferences from the Settings menu. The Preferences dialog box will
appear as follows:
From the dialog box, confirm or change the following settings:
Keep preview image
Selection of this check box causes the preview image which was created
from the last preview, to be re-displayed the next time MyScan is started.
Keep current settings
Selection of this check box causes all selections and control settings which
were in effect at the time of the last scan to be retained and re-established
the next time MyScan is opened. If Keep Current Settings is not checked,
then the factory preset selections and settings will appear the next time
MyScan is opened. (Factory preset selections and settings may also be
obtained at any time by choosing Reset Settings in the Settings menu.)
Preview with current settings
Selection of this check box allows you to preview an image which shows
the effects of all of the MyScan pre-scan options you have selected for that
image.
Scan Quality feature is not available for SF4500 Series.
2.27